1914LED Libertyville
Libertyville
Voir la famille Libertyville keyboard_arrow_rightAvantages & propriétés
HousingThe heavy wall die-cast housing is constructed of low-copper 360 aluminum alloy for enhanced corrosion resistance and high tensile strength.
Hang-Straight
A hang-straight transition is required for most mounting configurations.
The Standard (HSHx), The Clamp-Style (HSCx) and the (EZ) hang-straights are available.
Catenary Mount
A Catenary mount option is available for mounting this luminaire on aircraft cable.
Heat Pipes
Patented heat-pipe technology efficiently pulls heat away from the LED's, lowering the temperature while increasing the life and efficacy of the LED system.
Serviceability
Tool-less access to the driver compartment for ease of installation and maintenance.
Serviceability
Easy access to service the lens in the field.
Optique confortable et distributions
Sortie lisse et symétrique - SoftVue™ La lentille SV2 assure un confort visuel optimal - CCT standard de 2700, 3000, 4000 et 5000K
UL Listing
UL listed per UL1598 and CSA C22.2 No. 250.0 for the United States and Canada. Suitable for Wet Locations.
Electronic Driver
The UL recognized driver is installed integral to luminaire. The high efficiency Driver runs at 50/60HZ, utilizes 0-10V dimming protocol, and includes supplemental surge protection.
NightSky® Friendly
Dark sky design properties with a U0 BUG rating for specific configurations.
IP Rating
IP66 rated luminaire for enhanced protection against dust and water intrusion.
Finish
6 Stage Polyester Powder coat paint system.
Garantie
Garantie limitée de 7 ans
Fixed Dimming Resistor Board (FDRB)
Optional numbered 10-step selector switch allows for fine adjustment of the light levels in the field from 25% to 100% of the original output.
Decorative and functional lighting for roadway and area applications
The 1914LED Libertyville luminaire is a decorative downlight consisting of die-cast aluminum. Patented Heat-Pipe technology included with the 3L or 4L LED system. The unit is offered with sag or teardrop lenses, in glass and acrylic. Sternberg's optional SoftVue Lens technology optimizes surface brightness to reduce disability and discomfort glare. Optional shades can eliminate up light in some combinations.
EPA: 1.55 (ft²) | WEIGHT: 50 LBS (A-Lens), 65 LBS (G-Lens)
Mounting Configuration
Wall Mount
1 Arm Mount
2 Arm Mount @ 180°
2 Arm Mount @ 90°
3 Arms @ 120°
3 Arms @ 90°
4 Arms @ 90°
1 Arm M id-Mount
2 Arm M id-Mount @180°
Catenary
CCT - Color Temp (K)
2,700K
3,000K
3,500K
4,000K
5,000K
Distribution Type
Type 2
Type 3
Type 4
Type 5
Finish
Black Textured
White Textured
Park Green Textured
Arch Med Bronze Tex
Dark Bronze Textured
Custom Match
Old Iron
Rust
W eathered Brown
Cedar
W eathered Black
Two Tone
Verde Green
Swedish Iron
Old World Gray Tex
Certifications
