1335LED Revere
Revere
Voir la famille Revere keyboard_arrow_rightAvantages & propriétés
HousingThe heavy wall sand cast housing uses a low-copper aluminum 356 alloy for enhanced corrosion resistance and high tensile strength.
Internal Lens
An optional internal diffusing lens can be added for visual comfort.
Serviceability
Tool-less access to the driver compartment for ease of installation and maintenance.
Serviceability
Easy access to service the lens in the field.
Optique confortable et distributions
Sortie lisse et symétrique - SoftVue™ La lentille SV2 assure un confort visuel optimal - CCT standard de 2700, 3000, 4000 et 5000K
UL Listing
UL listed per UL1598 and CSA C22.2 No. 250.0 for the United States and Canada. Suitable for Wet Locations.
Electronic Driver
The UL recognized driver is installed integral to luminaire. The high efficiency Driver runs at 50/60HZ, utilizes 0-10V dimming protocol, and includes supplemental surge protection.
Finish
6 Stage Polyester Powder coat paint system.
Garantie
Garantie limitée de 7 ans
Fixed Dimming Resistor Board (FDRB)
Optional numbered 10-step selector switch allows for fine adjustment of the light levels in the field from 25% to 100% of the original output.
Classic 17th century design with modern lighting technology
The 1335LED Revere is a large scale modern replica of a gothic styled octagonal fixture. It uses heavy wall aluminum castings and includes a hinged roof with internal heatsink. Offered with a variety of lens options.
EPA: 3.96 (ft²) | WEIGHT: 45 LBS
Téléchargements
Documents (0)
0.00/250 MBFiches techniques
1335 HID Spec SheetPDFdownloadadd
Brochures
LensesPDFdownloadadd
Fichiers techniques
1335LED IES FilesZIPdownloadadd
Genesis3D Product ConfiguratorFiche d'installation
1335LED Installation InstructionsPDFdownloadadd
Configurateur de produit
Votre code produit
__-1335LED-__-__-__-__-__-__-__
Mounting Configuration
Fixture
Fitter
Driver
Lens
Optional Control Receptacle 6
Optional Control
Optional Fuse 8
Optional House Side Shield 9
Optional Internal Flat Lens
Optional Fixed Dimming Resistor Board 10
Finish
- 1 Only available with a round profile pole.
- 2 For use with (3) fitter only
- 3 Use 3” fitter for arm applications.
- 4 32L system only.
- 5 12L system only.
- 6 Not for use with FDRB.
- 7 Requires control receptacle.
- 8 Ships loose for installation in base.
- 9 Not for use with T5 optic.
- 10 Not for use with R7.
- 11 Smooth finishes are available upon request.
- 12 Custom colors require upcharge.
Mounting Configuration
Wall Mount
Post Top
1 Arm Mount
1 Arm & Post Top
2 Arm Mount @ 180°
2 Arm Mount @ 90°
2 Arm @ 180° & Post Top
3 Arms @ 120°
3 Arms @ 90°
3 Arm @ 120° & Post Top
4 Arms @ 90°
4 Arm @ 90° & Post Top
1 Arm M id-Mount
2 Arm M id-Mount @180°
Pier Base
CCT - Color Temp (K)
2,700K
3,000K
3,500K
4,000K
5,000K
Distribution Type
Type 2
Type 3
Type 4
Type 5
Finish
Black Textured
White Textured
Park Green Textured
Arch Med Bronze Tex
Dark Bronze Textured
Custom Match
Old Iron
Rust
W eathered Brown
Cedar
W eathered Black
Two Tone
Verde Green
Swedish Iron
Old World Gray Tex
Certifications
UL listed
7 Year Warranty