A45LED Palmetto
Palmetto
View Palmetto Family keyboard_arrow_rightFeatures & Benefits
Available with Intellistreets® TechnologyIntellistreets® is an integrated set of solutions offering the capability to see, hear, and record what’s happening on your streets, through both cameras and audio sensors.
Fitter
Twist-Lock Fitter option allows for tool-less removal of acorn/globe with a 90 degree turn. Available on select fitters.
Serviceability
Tool-less access to the driver compartment after the acorn is removed.
Serviceability
Easy access to service the lens in the field.
UL Listing
UL listed per UL1598 and CSA C22.2 No. 250.0 for the United States and Canada. Suitable for Wet Locations.
Electronic Driver
The UL recognized driver is installed integral to luminaire. The high efficiency Driver runs at 50/60HZ, utilizes 0-10V dimming protocol, and includes supplemental surge protection.
Finish
6 Stage Polyester Powder coat paint system.
Warranty
7-year limited warranty. See Support tab for Terms and Conditions.
Fixed Dimming Resistor Board (FDRB)
Optional numbered 10-step selector switch allows for fine adjustment of the light levels in the field from 25% to 100% of the original output.
Superior light distribution with added impact resistance
The A45LED Palmetto series is a stylized Victorian acorn fixture which consists of a decorative cast aluminum fitter, spun roof and high efficiency prismatic acrylic acorn. It shall be appointed with a cast aluminum decorative urn finial.
EPA: 1.95 (ft²) | WEIGHT: 28 LBS
Downloads
Documents (0)
0.00/250 MBTechnical Files
A45LED IES FilesZIPdownloadadd
Genesis3D Product Configurator
Product Configurator
Your Product Code
__-A45LED-__-4L-__-__-__-A-__
Mounting Configuration 1
Fixture
Fitter 1
Optional Twist Lock Acorn
LED
Driver
Optional Control Receptacle 6 7 8
Optional Control
Optional Fuse 12
Optional Ring
Optional Terminal Block 6
Optional Receptacle 14 6
Optional House Side Shield 15
Optional Fixed Dimming Resistor Board 10
Finish
- 1 Use 3” fitter for arm applications.
- 2 For use with 3" fitters only
- 3 Fitter available with “Twist-lock” acorn option
- 4 Consult factory for use on concrete poles.
- 5 Not for use with button photocell
- 6 For 900 series utility fitter only.
- 7 Not for use with FDRB.
- 8 For use with standard 3-Pin photocells only, not for use with a wireless network controller.
- 9 Requires control receptacle.
- 10 Not for use with R7.
- 11 Not for use with C2097 fitter.
- 12 Ships loose for installation in base.
- 13 Consult factory for specification details.
- 14 For use with MDLxx driver only.
- 15 Not for use with T5 optic.
- 16 Smooth finishes are available upon request.
- 17 Custom colors require upcharge.
Mounting Configuration
Wall Mount
Post Top
1 Arm Mount
1 Arm & Post Top
2 Arm Mount @ 180°
2 Arm Mount @ 90°
2 Arm @ 180° & Post Top
3 Arms @ 120°
3 Arms @ 90°
3 Arm @ 120° & Post Top
4 Arms @ 90°
4 Arm @ 90° & Post Top
1 Arm M id-Mount
2 Arm M id-Mount @180°
Pier Base
CCT - Color Temp (K)
2,700K
3,000K
3,500K
4,000K
5,000K
Distribution Type
Type 3
Type 4
Type 5
Finish
Black Textured
White Textured
Park Green Textured
Arch Med Bronze Tex
Dark Bronze Textured
Verde Green
Swedish Iron
Old World Gray Tex
Old Iron
Rust
W eathered Brown
Cedar
W eathered Black
Two Tone
Custom Match
Certifications
UL listed
7 Year Warranty